Yiziphi izinto eziyinhloko kanye nobukhulu bokucatshangelwa kwe-Roller Reamer Cutter?

Uma uklama, ukhetha, noma uthengaI-Roller ReamerIsisiki, izinto zokwakha kanye nobukhulu yizinto ezibalulekile ezithinta ngqo ukusebenza kwaso, isikhathi sokuphila kwaso, kanye nokusetshenziswa kwaso. Nazi izinto ezibalulekile okufanele uzicabangele:

1. Izinto Okufanele Ucatshangelwe Zokukhetha Izinto

Izingxenye eziyinhloko zokuguguleka kwe-Roller Reamer Cutter yizicucu ze-roller kanye nomzimba. Ukukhethwa kwezinto kumele kubhekele ubulukhuni, ukumelana nokuguguleka, ukuqina komthelela, kanye nokumelana nokushisa okuphezulu.

(1) Izinto Zokusika Amaroli

-Tungsten Carbide (WC)

- Ukukhetha okuvame kakhulu, okunikeza ubulukhuni obuphezulu (HRA 90+) kanye nokumelana nokuguguleka.

- Kufanelekela ukwakheka okuphakathi nokuqina kuya kokuqine kakhulu (isb., i-granite, i-quartzite).

- Qaphela okuqukethwe yi-cobalt (Co) (6% ~ 15%)—i-cobalt ephezulu ithuthukisa ukuqina kodwa inciphisa ubulukhuni.

- I-PDC (I-Polycrystalline Diamond Compact)

- Ifanele ukwakheka okuthambile kuya kokuphakathi nokuqina, enokumelana okuhle kakhulu nokuguguleka kodwa ukumelana okuphansi komthelela.

- Ivame ukusetshenziswa ekubholeni uwoyela kanye nokuhlola i-geology.

- Izimbozo ze-Ceramic noma ze-Ultra-Hard (isb., i-TiN, i-DLC)

- Isetshenziswa ezindaweni ezihlukumeza kakhulu kodwa ngezindleko eziphakeme.

(2) Izinto Zomzimba

- Insimbi Ehlanganisiwe (isb., 4140, 4340)

- Kudinga ukwelashwa kokushisa kokucima nokushisa (QT) ukuze kuthuthukiswe amandla nokuqina.

- Insimbi Engagqwali (isb., 17-4PH)

- Isetshenziswa ezindaweni ezigqwalisayo (isb., ukubhoboza ogwini lolwandle, ukwakheka kwe-asidi).

- Ukwelashwa Komphezulu (isb., i-chrome plating, i-nitriding) kungathuthukisa ukumelana nokuguguleka.

Amaphuzu Okukhetha Izinto Ezibalulekile:

✅ Khetha izinto zokusika ama-roller ngokusekelwe ebulukhunini bokwakheka (idwala eliqinile → i-tungsten carbide, idwala elithambile → i-PDC).

✅ Cabanga ngemithwalo yomthelela ukuze ugweme ukuqhekeka nokuqhekeka.

✅ Ezindaweni ezigqwalisayo (isb., amanzi anosawoti, i-H₂S), sebenzisa insimbi engagqwali noma izembozo ezikhethekile.

—

2. Izinto Okucatshangelwayo Ngobukhulu

Ubukhulu be-Roller Reamer Cutter buthinta ngqo ukuhambisana kwayo nobubanzi be-borehole, ukuzinza, kanye nokusebenza kahle kokusika.

(1) Ububanzi Bangaphandle (OD)

- Kumelwe kufane nobubanzi bembobo eqondiwe (ngokuvamile ibe nkulu kancane kune-drill bit yokulungisa imbobo).

- Cabangela ukubekezelelana (± 0.1~0.5mm) ukuqinisekisa ukunemba kokujiya.

- Ekubholeni uwoyela, kumele kuhambisane nezindinganiso ze-API (isb., i-API 7-1).

(2) Ubude

- Kuthinta ukuzinza—ama-reamer amade anikeza isiqondiso esingcono kodwa angandisa ukungqubuzana.

- Ububanzi obujwayelekile: 200mm ~ 1500mm (kuye ngokuthi kusetshenziswe ini).

(3) Inombolo kanye Nokuhlelwa Kwabasiki

- Izicucu zama-roller ezingu-3~6 zivame kakhulu—izicucu eziningi zithuthukisa ukuzinza kodwa zandisa isidingo se-torque.

- Ukuhlelwa kwe-Helical kunciphisa ukudlidliza, okufanelekela ukubhoboza imigodi ejulile.

(4) Uhlobo Lokuxhumana (Uchungechunge)

- Imicu ye-API (isb., i-NC50, i-6 5/8″ REG) yamathuluzi okubhoboza uwoyela.

- Ukuxhumana okukhethekile (isb., IF, FH) kumele kuhambisane nentambo yokubhoboza.

Amaphuzu Okukhetha Ubukhulu Obuyinhloko:

✅ I-OD kumele ifane nosayizi wembobo eqondiwe, okubalwa ukuguguleka ngokuhamba kwesikhathi.

✅ Isilinganiso sobude nobubanzi (L/D) sithinta ukuzinza—ama-reamer amade angcono kakhulu emigodini ejulile.

✅ Ukuxhumeka kwentambo kumele kuhambisane nentambo yokubhoboza ukuze kuvinjelwe ukwehluleka komgodi ongaphansi.

—

3. Amanye Amapharamitha Abalulekile

- I-RPM ephezulu:Kuthinta isikhathi sokuphila kwesikhi—kumele kubekwe ngokusekelwe ezintweni kanye nokugcotshwa.

-Izinga Lokushisa Elisebenzayo:Izindawo ezinokushisa okuphezulu (isb., imithombo ejulile) zidinga ama-alloy amelana nokushisa.

- Ukuhambisana Kodaka/Kokupholisa: Qinisekisa ukuthi izinto ziyamelana nokugqwala okuvela kuketshezi lokubhoboza.

Isifinyezo: Uhlu Lokuhlola Lokukhetha

|Into | Okucatshangelwayo |

|————–|————|

| Izinto Zokusika Amaroli | I-Tungsten carbide (idwala eliqinile), i-PDC (idwala elithambile), ukumelana nokushaya |

| Izinto Zomzimba | Insimbi ye-alloy (4140), insimbi engagqwali (17-4PH) |

| Ububanzi Bangaphandle (OD) | Qondanisa usayizi wembobo eqondiwe, cabanga ngokubekezelelana |

| Ubude | Isilinganiso sobude kuya kububanzi (L/D) sithinta ukuzinza |

| Inani Labasiki | Abasiki abangu-3~6, ukuhlelwa kwe-helical kunciphisa ukudlidliza |

| Uhlobo Lokuxhumeka | Imicu ejwayelekile ye-API (NC50, REG) |

|Indawo Yokusebenza | Izinga lokushisa, ukugqwala, imithwalo yomthelela |

UJunnie Liu

Iselula/I-Whatsapp:+0086-158 7765 8727
I-imeyili:landrill@landrilltools.com